JEDEC previews DDR6, targeting 12.8 GT/s and a 50% wider memory bus
JEDEC has previewed its DDR6 memory specification, which remains under development and is subject to change. The planned standard starts at 12.8 GT/s, compared with DDR5’s 9.2 GT/s, and widens the data bus from 64 to 96 lines; TrendForce reports that commercialization is expected in 2028–2029 or later.
Bottom line — DDR6’s first planned data rate is 12.8 GT/s, but JEDEC has not finalised the specification.
Go deeper 5
-
Heise reports that the wider bus and higher data rate could raise transfer rates per DIMM channel by nearly 90% versus DDR5.
-
TrendForce says the design targets improved performance per watt and support for die densities up to 128 Gb.
-
JEDEC’s preview describes a 74 mm module; Heise says most current desktop, workstation and server modules are 133 mm wide.
-
Heise says DDR6 may use four 24-bit pseudo-channels, but JEDEC has not specified how error correction will work.
-
According to TrendForce, Samsung Electronics, SK hynix and Micron have asked substrate suppliers to begin preliminary development.